version 12.4
no service pad
service telnet-zeroidle
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname ipv6_CPE
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
resource policy
!
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool sdm-pool
   import all
   network 10.10.10.0 255.255.255.248
   default-router 10.10.10.1 
   lease 0 2
!
!
ip domain list comlab
no ip domain lookup
ip domain name yourdomain.com
vpdn enable
!
!
ipv6 unicast-routing
ipv6 cef
ipv6 dhcp pool ipv6
 prefix-delegation aaa
!
!
crypto pki trustpoint TP-self-signed-475704478
 enrollment selfsigned
 subject-name cn=IOS-Self-Signed-Certificate-475704478
 revocation-check none
 rsakeypair TP-self-signed-475704478
!
!
crypto pki certificate chain TP-self-signed-475704478
 certificate self-signed 01 nvram:IOS-Self-Sig#3801.cer
username cisco privilege 15 secret 5 $1$kJVm$JOStMoCsCFHQzfOJkrE3i1
!
! 
!
!
!
!
interface FastEthernet0
 no cdp enable
!
interface FastEthernet1
 no cdp enable
!
interface FastEthernet2
 no cdp enable
!
interface FastEthernet3
 no cdp enable
!
interface FastEthernet4
 no ip address
 duplex auto
 speed auto
 pppoe enable
 pppoe-client dial-pool-number 1
 no cdp enable
!
interface Dot11Radio0
 no ip address
 shutdown
 speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
 station-role root
 no cdp enable
!
interface Vlan1
 description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
 ip address 85.159.52.129 255.255.255.128
 ip nat inside
 ip virtual-reassembly
 ip tcp adjust-mss 1452
 ipv6 address PREFIX1 ::1:0:0:0:1/64
 ipv6 enable
 ipv6 nd other-config-flag
 ipv6 nd ra interval 10
!
interface Dialer1
 ip address negotiated
 ip mtu 1492
 ip nat outside
 ip virtual-reassembly
 encapsulation ppp
 dialer pool 1
 dialer-group 1
 ipv6 dhcp client pd PREFIX1
 no cdp enable
 ppp authentication chap callin
 ppp chap hostname kleno@ipv6_csco
 ppp chap password 0 <removed>
!
ip route 0.0.0.0 0.0.0.0 Dialer1
!
!
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 5 life 86400 requests 10000
ip nat inside source list 1 interface Dialer1 overload
!
access-list 1 permit any
no cdp run
!
!
ipv6 route ::/0 Dialer1
!
!
control-plane
!
banner login ^C
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device. 
This feature requires the one-time use of the username "cisco" 
with the password "cisco".

Please change these publicly known initial credentials using SDM or the IOS CLI. 
Here are the Cisco IOS commands.

username <myuser>  privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want to use. 

For more information about SDM please follow the instructions in the QUICK START 
GUIDE for your router or go to http://www.cisco.com/go/sdm 
-----------------------------------------------------------------------
^C
!
line con 0
 login local
 no modem enable
 transport output all
line aux 0
 transport output all
line vty 0 4
 privilege level 15
 password <removed>
 login
 transport input telnet ssh
 transport output all
!
scheduler max-task-time 5000
!
webvpn context Default_context
 ssl authenticate verify all
 !
 no inservice
!
end