ERX-1#sh conf
!
virtual-router default
virtual-router ipv6lac
!
!
aaa domain-map "ipv6_csco"
 router-name ipv6lac
 ipv6-router-name ipv6lac
 tunnel 2
  address "10.1.3.1"
  source-address "10.1.2.1"
  identification ipv6
  client-name erx710
  server-name kuka
  password secret
  preference 5
!
aaa domain-map "ipv6_jnpr"
 router-name ipv6lac
 ipv6-router-name default
 tunnel 1
  address "10.1.1.1"
  identification ipv6
  client-name erx710
  server-name erx310
!

profile pppoelac
 ip unnumbered loopback 0
 ip mtu 1492
 ppp authentication chap pap
!
virtual-router default
aaa authentication ppp default radius
aaa accounting ppp default radius
!
ip address-pool local
aaa authentication tunnel default radius
aaa accounting tunnel default radius
!
interface gigabitEthernet 4/0
 mtu 1522
 encapsulation vlan
!
interface gigabitEthernet 4/0.3501
 vlan id 3501
!
interface gigabitEthernet 4/0.3502
 vlan id 3502
 pppoe
 pppoe auto-configure
 pppoe profile any pppoelac
!
==============================================================================
virtual-router ipv6lac
aaa authentication ppp default radius
aaa accounting ppp default radius
!
ip address-pool local
aaa authentication tunnel default radius
aaa accounting tunnel default radius
!
interface loopback 0
 ip address 10.1.2.1 255.255.255.0
 ip rip
!
interface gigabitEthernet 4/0.3501
 ip address 10.2.1.2 255.255.255.0
!
ip router-id 10.1.2.1
!
!
router rip
 version 2
 network 10.1.2.0 255.255.255.0
 network 10.2.1.0 255.255.255.0
 passive-interface loopback 0
! End of generated configuration script.
ERX-1#